Whatsapp
Posted : Thursday, November 23, 2023 05:27 AM
AH-64 MTP - Maintenance Test Pilot (AH-64 D/E) Fort Hood, TX
R0092007
Fort Hood, Texas, United States
Full time
Add to favorites Favorited View favorites
The AH-64 D/E MTP Maintenance Test Pilot (AH-64 D/E) utilizes flight test techniques to perform test flights of aircraft to measure performance and handling to determine airworthiness following maintenance or modifications.
Minimum of Ten (10) years of aviation maintenance experience required.
Prefer a Minimum of 1,000 or more hours of total flight time (PIC) and have at least 300 hours in the same aircraft type and design and 100 hours in the AH-64 D/E.
Version 6 Qualified.
Perform troubleshooting procedures of aircraft on the ground and during flight and makes appropriate write-ups or gives verbal instructions to correct deficiencies.
Verify forms and records used in the performance of maintenance to ensure they comply with work performed prior to ground or flight checks.
Run-up aircraft for alert status to perform test on modifications.
Interpret meteorological data as it pertains to filing a flight plan for the navigational course of flight needed for a sortie and files a flight plan for all flights using authorized processes.
File flight plans for all flights using authorized navigational processes.
Compute weight and balance logs for the aircraft being flown.
Initiate and complete all military flight or maintenance forms to document maintenance test flight completion and discrepancies.
Communicate, troubleshoot, advise and work side by side with military pilots and technicians.
Communicate, troubleshoot, advise and work side by side with military pilots and technicians.
As qualified may perform as site safety specialist and/or additional duties safety officer functions.
Must be capable of Aircraft Technical Inspection (TI) as additional duty.
Plan and conduct aircraft technical inspections.
May support AS9100-AS9110 internal audits, corrective action requests, assist section, department, and/or program in developing plans to correct identified shortfalls.
Provide technical guidance to repairs performing aircraft and subsystem maintenance techniques and safety procedures.
Evaluate operational readiness of aircraft and recommend corrective action.
Inspect crash-damaged aircraft and estimates time, parts and costs to repair.
Ensure compliance with aircraft configuration control, Army oil analysis program and test measuring and diagnostic calibration.
Evaluate maintenance operations and facilities for compliance with directives, technical manuals, work standards, safety procedures, and operational policies.
Performs maintenance trend analysis and applies production control, quality control and other maintenance management principles and procedures to aircraft maintenance operations.
Perform other qualified duties as assigned.
Minimum Requirements Minimum of Ten (10) years of aviation maintenance experience required.
Prefer a Minimum of 1,000 or more hours of total flight time (PIC) and have at least 300 hours in the same aircraft type and design and 100 hours in the AH-64 D/E.
Version 6 Qualified.
Successfully completed Army Maintenance Test Pilots Course (MTPC) or complete an equivalency evaluation IAW AR 95-1 and 95-20.
Successfully completed the US Army Aircraft Maintenance Officers Course (AMOC) Phase II or complete an equivalency evaluation IAW AR 95-1 and 95-20.
Satisfactorily completed a proficiency check within the previous 12 months.
Successfully complete initially and annually thereafter an Army or FAA Class II flight physical.
Possess an instrument rating on their FAA Commercial Certificates.
Possess a current valid Army or FAA Class II Medical Certificate.
Completed military flight and applicable training courses as required IAW 95-20.
Must meet the qualification requirements of AR 95-20.
Must meet the experience requirements of AFR55-22, NOTAMS, AR95-10, AR95-20 and DCMA-8210 pertaining to each aircraft prior to acting in the capacity of pilot-in-command on maintenance test flights.
Must be able to obtain and maintain a (Secret Clearance) US Government Clearance.
US Citizenship is required to obtain s Secret Clearance.
Must be able to obtain and maintain facility credentials/authorization.
US Citizenship is required for facility credentials/authorization at this work location.
Preferred/Physical Qualifications: Maintains technical library, inspect systems, subsystems, and components according to applicable technical publications and checklists before, during and after airplane maintenance and modifications.
Annotate records of required maintenance.
Perform troubleshooting and analyze electrical/electronic systems.
Lectures, demonstrates, and practical exercises in inspection techniques, procedures, performance evaluation, and operational checks on the power plant, structure, and systems of helicopters powertrains.
Demonstrated proven and verifiable aviation experience including ethics, ability and professionalism of the highest standards are required for this position.
Must have demonstrated communication skills, both oral and written.
Must be fluent in the English language.
Working knowledge for operating navigational and communication equipment installed on the aircraft.
Capable of computing and annotating weight and balance logs for the aircraft.
May be exposed to extreme noise from turbine and jet engine aircraft.
May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts and vehicles.
May be exposed to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.
Must be able to distinguish color and judge three-dimensional depth.
Must be able to see aircraft in flight, read dials/gauges, identify small objects and hand tools.
Must be physically capable of climbing vertical ladders or built-in aircraft steps to heights of 10-12 feet.
May be exposed to chemical mist, gas, vapors, ultra-violet and infrared radiation.
May be required to lift to 50 pounds to a height of four (4) feet and be required to lift to 20 pounds to a height of seven (7) feet.
May be exposed to certain obstructions on the surface as well as ladders, stairs, etc.
May be exposed to rapid or extreme temperature changes.
May be required to travel domestically and internationally on short notice, to austere environments, under harsh living conditions.
Amentum is proud to be an Equal Opportunity Employer.
Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.
EEO is the Law Poster EEO is the Law Poster Supplement
Minimum of Ten (10) years of aviation maintenance experience required.
Prefer a Minimum of 1,000 or more hours of total flight time (PIC) and have at least 300 hours in the same aircraft type and design and 100 hours in the AH-64 D/E.
Version 6 Qualified.
Perform troubleshooting procedures of aircraft on the ground and during flight and makes appropriate write-ups or gives verbal instructions to correct deficiencies.
Verify forms and records used in the performance of maintenance to ensure they comply with work performed prior to ground or flight checks.
Run-up aircraft for alert status to perform test on modifications.
Interpret meteorological data as it pertains to filing a flight plan for the navigational course of flight needed for a sortie and files a flight plan for all flights using authorized processes.
File flight plans for all flights using authorized navigational processes.
Compute weight and balance logs for the aircraft being flown.
Initiate and complete all military flight or maintenance forms to document maintenance test flight completion and discrepancies.
Communicate, troubleshoot, advise and work side by side with military pilots and technicians.
Communicate, troubleshoot, advise and work side by side with military pilots and technicians.
As qualified may perform as site safety specialist and/or additional duties safety officer functions.
Must be capable of Aircraft Technical Inspection (TI) as additional duty.
Plan and conduct aircraft technical inspections.
May support AS9100-AS9110 internal audits, corrective action requests, assist section, department, and/or program in developing plans to correct identified shortfalls.
Provide technical guidance to repairs performing aircraft and subsystem maintenance techniques and safety procedures.
Evaluate operational readiness of aircraft and recommend corrective action.
Inspect crash-damaged aircraft and estimates time, parts and costs to repair.
Ensure compliance with aircraft configuration control, Army oil analysis program and test measuring and diagnostic calibration.
Evaluate maintenance operations and facilities for compliance with directives, technical manuals, work standards, safety procedures, and operational policies.
Performs maintenance trend analysis and applies production control, quality control and other maintenance management principles and procedures to aircraft maintenance operations.
Perform other qualified duties as assigned.
Minimum Requirements Minimum of Ten (10) years of aviation maintenance experience required.
Prefer a Minimum of 1,000 or more hours of total flight time (PIC) and have at least 300 hours in the same aircraft type and design and 100 hours in the AH-64 D/E.
Version 6 Qualified.
Successfully completed Army Maintenance Test Pilots Course (MTPC) or complete an equivalency evaluation IAW AR 95-1 and 95-20.
Successfully completed the US Army Aircraft Maintenance Officers Course (AMOC) Phase II or complete an equivalency evaluation IAW AR 95-1 and 95-20.
Satisfactorily completed a proficiency check within the previous 12 months.
Successfully complete initially and annually thereafter an Army or FAA Class II flight physical.
Possess an instrument rating on their FAA Commercial Certificates.
Possess a current valid Army or FAA Class II Medical Certificate.
Completed military flight and applicable training courses as required IAW 95-20.
Must meet the qualification requirements of AR 95-20.
Must meet the experience requirements of AFR55-22, NOTAMS, AR95-10, AR95-20 and DCMA-8210 pertaining to each aircraft prior to acting in the capacity of pilot-in-command on maintenance test flights.
Must be able to obtain and maintain a (Secret Clearance) US Government Clearance.
US Citizenship is required to obtain s Secret Clearance.
Must be able to obtain and maintain facility credentials/authorization.
US Citizenship is required for facility credentials/authorization at this work location.
Preferred/Physical Qualifications: Maintains technical library, inspect systems, subsystems, and components according to applicable technical publications and checklists before, during and after airplane maintenance and modifications.
Annotate records of required maintenance.
Perform troubleshooting and analyze electrical/electronic systems.
Lectures, demonstrates, and practical exercises in inspection techniques, procedures, performance evaluation, and operational checks on the power plant, structure, and systems of helicopters powertrains.
Demonstrated proven and verifiable aviation experience including ethics, ability and professionalism of the highest standards are required for this position.
Must have demonstrated communication skills, both oral and written.
Must be fluent in the English language.
Working knowledge for operating navigational and communication equipment installed on the aircraft.
Capable of computing and annotating weight and balance logs for the aircraft.
May be exposed to extreme noise from turbine and jet engine aircraft.
May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts and vehicles.
May be exposed to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure.
Must be able to distinguish color and judge three-dimensional depth.
Must be able to see aircraft in flight, read dials/gauges, identify small objects and hand tools.
Must be physically capable of climbing vertical ladders or built-in aircraft steps to heights of 10-12 feet.
May be exposed to chemical mist, gas, vapors, ultra-violet and infrared radiation.
May be required to lift to 50 pounds to a height of four (4) feet and be required to lift to 20 pounds to a height of seven (7) feet.
May be exposed to certain obstructions on the surface as well as ladders, stairs, etc.
May be exposed to rapid or extreme temperature changes.
May be required to travel domestically and internationally on short notice, to austere environments, under harsh living conditions.
Amentum is proud to be an Equal Opportunity Employer.
Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran’s status, ancestry, sexual orientation, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.
EEO is the Law Poster EEO is the Law Poster Supplement
• Phone : NA
• Location : Fort Hood, TX
• Post ID: 9001740025
